The fogging issue: To prevent headlights from clouding due to outgassing
The term fogging describes the problem of headlamps clouding due to outgassing. Fogging can occur as a result of the outgassing of the parts installed in the headlamp of an automobile, especially those with plastic components. Due to the encapsulation of the headlamp housing, these outgassings cannot escape as is usual in other applications, but[…]
Read More
FITCO®Therm Heat Protection Tubing: Properties and Applications
The FITCO®Therm heat protection tubing is a hose optimized for thermal heat protection applications, consisting of resin-impregnated glass fiber braid. The additive use of resins gives the heat protection tubing from stability, moderate mechanical resistance, and a reduced risk of splitting of the hose ends. In addition, the product withstands prolonged heat exposure up to[…]
Read More
FP liner as PTFE alternative: production and application
PBT (polybutylene terephthalate) is a thermoplastic from the polyester group with properties comparable to semi-crystalline polyethylene terephthalate (PET). GREMCO manufactures the thermoplastic fluorinated polymer alloy FP (Fluorinated Engineering Polymer) based on the PBT base polymer, whereby the PBT is upgraded by the incorporation of fluorinated additives. Thanks to these fillers, the resulting FP liners are[…]
Read More
PTFE liner: production, variants and application
By the end of the 1960s, Markel Corporation had already established itself as a major supplier to the automotive sector with a wide range of plastic-based tubing components such as heat shrinkable tubing, braided fiberglass sleeving, and silicone rubber tubing as a major supplier to the automotive sector. At that time, automotive engines were becoming[…]
Read More
FITCOTUBE® FT100 heat shrinkable tubing: Properties and applications
The main product in our wide range of products is the FITCOTUBE® FT100 heat shrinkable tubing, which is made of high-quality polyolefin and is manufactured in a thin-walled version. Polyolefin is a collective term for various types of plastics from the group of olefins, which are produced from oil or natural gas through polymerization and[…]
Read More
FTLV solder connectors: structure, properties and applications
If the solder connection of two or more cables is to be sealed watertight and almost airtight, the use of a solder connector is recommended due to its quick and easy installation. This allows the litz to be soldered simply by using a heat gun. This simplifies the soldering process and ensures controlled soldering as[…]
Read More
David Panish joining GREMCO as new Vice President
After 47 eventful years at Markel Corporation, we are very pleased to welcome David Panish as GREMCO’s new Vice President. We wish him all the best for a good start and look forward to a successful collaboration with a renowned and experienced expert in the field of Fluoropolymer-based liner products. The Markel Corporation The[…]
Read More
Dual-walled PTFE/FEP heat shrink tubing
A unique GREMCO product is the dual-walled PTFE/FEP shrink tubing. This is a special, dual-layer shrink tubing consisting of the semi-crystalline fluorocarbon polymer polytetrafluoroethylene (PTFE) and the copolymer tetrafluoroethylene-hexafluoropropylene (FEP). In this way, the unique properties of the materials are combined in one product and complement each other reciprocally. Furthermore, heating the dual-walled PTFE/FEP shrink[…]
Read More
PTFE liners as efficient inner lining for Bowden cables
GREMCO’s PTFE liners ensure high efficiency for the inner liners of mechanical actuating cables, which are also commonly referred to as Bowden cables. How is a Bowden cable constructed? The Bowden cable is a movable machine element for transmitting a mechanical movement, as well as compression and traction forces, by using a flexible combination[…]
Read More
Shrink tubing made of fluoroplastics: types and properties
Due to its excellent material properties, FITCOTUBE® shrink tubing made of fluoroplastics is suitable for insulating sensors and electrical connections at high temperatures and for protecting cables and components. It can be used in automotive, aerospace, medical and environmental engineering. Fine-tuning for the desired application can be achieved by using different fluoroplastics for the desired application.[…]
Read More
